From: Michael Brummitt <A5713644676@ATTPLS.NET>
Date: Fri, 9 Aug 1996 14:10:43 +0000
Subject:
Dear MAGIC CAP, I am looking to buy a copy of Magic Exchange. Anyone have a copy they would like to sell cheap? Also, I would be interested in knowing what mail services others are switching to now that ATT is discontinuing PersonaLink. And one more question. Can any PCMCIA memory card be used with a PIC-1000 or do you have to use Sony's? Thanks, Mike
From: Bob Arsenault/US/3Com <Bob_Arsenault@3MAIL.3COM.COM>
Date: Fri, 9 Aug 1996 10:24:07 EDT
Subject: Memory for ML 1000
To follow up on Mr. Brummitt's question, Does the memory card for the ML1000 have to be 1Mb, or can you utilize larger cards like the 2Mb, or 4Mb SRAM cards? I thought I read on a thread last week that someone with a ML1000 is using a 4Mb card.........can anyone verify this one for me? Thanks, /BobA
From: AJ Wright <aj@GS1.CINTI.NET>
Date: Fri, 9 Aug 1996 14:39:42 -0400
Subject: ISPs
>I am awaiting my package of presto mail from Sony and still have not >picked an ISP . >Can anyone comment on >Netcom or other ISP's that they have switched to. I am looking for a >nationwide service. Check out C/Net's WWW site. There is an ISP rating there :) AJ ^ ^ ~ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ "Trust yourself. Think for yourself. Act for yourself. Speak for yourself. Be yourself. Imititation is suicide." Marva Collins @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
From: MCW Online <mcwonline@genmagic.com>
Date: Fri, 9 Aug 1996 11:49:17 -0700
Subject: Re: NETCOM Phone #
At 07:12 PM 8/7/96 -0400, Nancy J. Webb wrote: >Hi - > >Has anyone else tried the "Subscribe to NETCOM" 800 number listed in the >NETCOM brochure which is packaged with Presto!stuff? When I dialed it, I >got a recording asking me to enter a 4-digit PIN number. > >I can find another way to reach NETCOM, but was curious if anyone else had >this problem. > >Thanks, >Nancy > >nwebb@tiac.net > The Netcom data sheet has an incorrect number on it. It reads as 1-800-NETCOMI. the correct number is 1-800-NETCOM1 (that is a one, not an i). We have corrected this error, and all products should be shipping with the correst information soon Thank you for the input ++++++++++++++++++++++ Joel Connors Magic Cap Support General Magic Email at: mcwonline@genmagic.com
From: "Michael H. Phillips" <michael_phillips@USA.NET>
Date: Fri, 9 Aug 1996 15:57:43 -0400
Subject: Re: Memory for ML 1000
Bob Arsenault/US/3Com wrote: > > To follow up on Mr. Brummitt's question, > Does the memory card for the ML1000 have to be 1Mb, or can you utilize larger > cards like the 2Mb, or 4Mb SRAM cards? > > I thought I read on a thread last week that someone with a ML1000 is using a > 4Mb card.........can anyone verify this one for me? > > Thanks, > /BobA I have used a 2Meg Grid card in my ML1000 and 2000. Others have used 4 meg cards and two 2 meg cards (in ML2000). As long as its SRAM, it should work. Regards, Mike Phillips michael_phillips@usa.net
From: Luke Derossi <lderossi@COMCAT.COM>
Date: Fri, 9 Aug 1996 16:23:45 -0400
Subject: Re: Memory for ML 1000
Bob Arsenault/US/3Com wrote: > > To follow up on Mr. Brummitt's question, > Does the memory card for the ML1000 have to be 1Mb, or can you utilize larger > cards like the 2Mb, or 4Mb SRAM cards? > > I thought I read on a thread last week that someone with a ML1000 is using a > 4Mb card.........can anyone verify this one for me? > > Thanks, > /BobA Bob, Yes, larger SRAM cards will work as long as it is SRAM and not FlashRAM. It has been some users' experiences that the larger the card, the more time it takes to swap a card in/out, and also more main memory is eaten as the card capacity grows. Keep this in mind when choosing the SRAM card that right for you. Regards, Luke Derossi for General Magic, Inc.
From: Luke Derossi <lderossi@COMCAT.COM>
Date: Fri, 9 Aug 1996 16:21:33 -0400
Subject: Re: RAM cards (was: <untitled>)
Michael Brummitt wrote: > > Dear MAGIC CAP, > > And one more question. Can any PCMCIA memory card be used with a > PIC-1000 or do you have to use Sony's? > > Thanks, > > Mike Mike, Physically Magic Cap devices require any PCMCIA memory card that adheres to the following guidelines: 1) It must be SRAM, not FlashRAM or other RAM type, 2) it must conform to CMOS voltage standards. This means virtually any SRAM card you can get from a vendor will work in a Magic Cap device. However, Sony's Magic Cap devices specifically call for Sony SRAM PC cards, (and I *think* they also allow HP cards, supposedly because HP manufactures the Sony cards anyway) simply because they will not support anything else if you run into trouble with the card. That said, I believe there are a wide variety of brands in use. To date, there has only been one publicized issue of partial non-functionality and that was with old Apple Newton SRAM cards. It was a fuzzy issue, mainly because so many people were using them without trouble; however some were losing data and having problems and it was determined that this was because the card conforms to the TTL voltage standard. Regards, Luke Derossi for General Magic, Inc.
From: "Rishi R. Oswal" <Yipadedoda@AOL.COM>
Date: Fri, 9 Aug 1996 17:32:49 -0400
Subject: Magic4Sale
I am going to regret this, but....I have decided to sell my Magic Link PIC 2000. I will be going to college next year and need the money to buy a notebook ( powerbook ). Fortunately, I still have a PIC 1000 which I received as a Codewarrior bundle. Perhaps, when I have the money, I will buy the 2000 again. The deal is as follows: -1 Magic Link PIC 2000 - AC Power Adapter -The Sony MP520 lithium ion battery - Waterproof and shockabsorbant carrying case with briefcase style handle and shoulder strap ( great case! ) - 1 meg SRAM Card - Another 1 meg SRAM Card - 1 new Barrier screen protector - Graffiti handwriting recognition - PrestoLinks/Mail suite - Aha Inkwriter ( ink based wordprocessor ) - Writeware Stealth Sytlus ( Pen and Stylus in one ) - Magic Cap Complete book - Presenting Magic Cap book PRICE: $710 ( I'll take care of shipping costs ) I have taken excellent care of my Magic Link. It has been in the waterproof shock resistant case and has had a screen protector installed since day one. There is no damage whatsoever. One thing that is missing is the plastic stylus that comes included with my magic link. I think I lost it in a bamcug ( bay area magic cap users group ) meeting. But there is a Stealth stylus included in the package. If I find the lost pen, I will include it. PLEASE EMAIL ME IF INTERESTED Goodbye Magic... Rishi Oswal Yipadedoda@aol.com
From: Rick Donald <rick_donald@genmagic.com>
Date: Fri, 9 Aug 1996 14:57:34 -0700
Subject: Re: Presto!Links package ballooning
The memory being allocated with GIF enabled is used for processing the GIF. There is no way around it..... Rick ================================================================ Rick Donald phone: (408) 774-6921 Magic Cap Licensee Engineer fax: (408) 774-4020 General Magic, Inc. email: Rick_Donald@genmagic.com
From: Victor Carreon <vcarreon@ASYST.NET>
Date: Fri, 9 Aug 1996 18:59:49 -0700
Subject: Re: Magic4Sale
Rishi R. Oswal wrote: > > I am going to regret this, but....I have decided to sell my Magic Link PIC > 2000. I will be going to college next year and need the money to buy a > notebook ( powerbook ). Fortunately, I still have a PIC 1000 which I received > as a Codewarrior bundle. Perhaps, when I have the money, I will buy the 2000 > again. The deal is as follows: > > -1 Magic Link PIC 2000 > - AC Power Adapter > -The Sony MP520 lithium ion battery > - Waterproof and shockabsorbant carrying case with briefcase style handle and > shoulder strap ( great case! ) > - 1 meg SRAM Card > - Another 1 meg SRAM Card > - 1 new Barrier screen protector > - Graffiti handwriting recognition > - PrestoLinks/Mail suite > - Aha Inkwriter ( ink based wordprocessor ) > - Writeware Stealth Sytlus ( Pen and Stylus in one ) > - Magic Cap Complete book > - Presenting Magic Cap book > > PRICE: $710 ( I'll take care of shipping costs ) > > I have taken excellent care of my Magic Link. It has been in the waterproof > shock resistant case and has had a screen protector installed since day one. > There is no damage whatsoever. One thing that is missing is the plastic > stylus that comes included with my magic link. I think I lost it in a bamcug > ( bay area magic cap users group ) meeting. But there is a Stealth stylus > included in the package. If I find the lost pen, I will include it. > > PLEASE EMAIL ME IF INTERESTED > > Goodbye Magic... > > Rishi Oswal > Yipadedoda@aol.com I'm interested. Call me: 714.857.8461 Or EMail: vcarreon@asyst.net. Can I contact you? Thanks